New 70-tooth spur gear and optional shock pistons for Tekno RC EB410

0 Dec. 1, 2017, 9:06 a.m.

By Aaron Waldron
LiveRC.com

New from Tekno RC:
www.teknorc.com

Shock Pistons (CNC, 2×1.7, flat/flat, 13mm, 2pcs)
#TKR6731, $10

With these optional pistons, it is now easier than ever to fine-tune suspension characteristics based on your needs. Made from precision machined self-lubricating delrin, these CNC pistons have two large 1.7mm holes and four small relief holes. The TKR6731 Shock Pistons are for use in the Tekno RC EB410 1/10th Scale 4wd Buggy.

Shock Pistons (CNC, 2×1.8, flat/flat, 13mm, 2pcs)
#TKR6732, $10

With these optional pistons, it is now easier than ever to fine-tune suspension characteristics based on your needs. Made from precision machined self-lubricating delrin, these CNC pistons have two large 1.8mm holes and four small relief holes. The TKR6732 Shock Pistons are for use in the Tekno RC EB410 1/10th Scale 4wd Buggy.

Spur Gear (70t, 48pitch, composite, black, EB410)
#TKR6670, $8

The TKR6670 70 tooth black composite spur gear is intended to be used on the EB410 buggy when running a 13.5 (or more) turn motor. If you were running a 25 tooth or larger pinion with the stock spur, this optional spur allows you to run a smaller pinion.

Pair this spur with a smaller pinion and the motor will be more centrally located, providing better balance. This spur is especially helpful in stock motor racing as it allows for additional gearing options while reducing the driveline’s rotating mass.