New Exotek Racing puck pins and B6 Flite rear axles

ADVERTISEMENT | ADVERTISE WITH US

By Aaron Waldron
LiveRC.com

New from Exotek Racing:
www.exotekracing.com

PUCK PINS FOR 22 SERIES, 1 pair steel 2.35MM pins
#1817, $9

Hardened steel 1 piece bone pins for 22 series buggies.

Converts lightweight MIP Puck Bones to fit standard buggy diff outdrives.

These pins are for use with MIP type lightweight bones but allow the puck bones to be used with the stock diff outdrives for increased durability and less parts and maintenance.

The free spinning pin creates less friction than standard bone pins, for longer lasting outdrives and a more free drive train and is captured within the outdrive for secure trouble free operation.

'Opens up the possibility of using MIP puck bones in other cars that have matching 2.35mm pin sizes.'

NOTE: For the 22-4 use 22 4.0 'puck bones' in the rear.
NOTE: Not for the 22SR plastic outdrives.

1 pair of pins. Use anti wear lube on the center barrel section.

PUCK PINS FOR AE SERIES, 1 pair steel 2.5mm pins
#1818, $9

Hardened steel 1 piece bone pins for B6, B64 and B5 series buggies.

Converts lightweight MIP Puck Bones to fit standard buggy diff outdrives.

These pins are for use with MIP type lightweight bones but allow the puck bones to be used with the stock diff outdrives for increased durability and less parts and maintenance.

The free spinning pin creates less friction than standard bone pins, for longer lasting outdrives and a more free drive train and is captured within the outdrive for secure trouble free operation.

'Opens up the possibility of using MIP puck bones in other cars that have matching 2.5mm pin sizes'.

1 pair of pins. Use anti wear lube on the center barrel section.

B6 67mm FLITE REAR AXLE, titanium 1 pair (for option 67mm bones)

#1786, $24

Lightweight Ti6 titanium rear axles for the B6 with new 67mm axles and off set hubs.

Best suited for stock classes for reduced rotational mass and weight needed in the hot 17.5 classes (not suggested for modified use).

Only 7gr for the pair.

B6 65mm FLITE REAR AXLE, titanium 1 pair (for stock 65mm bones)
#1825, $24

Lightweight Ti6 titanium rear axles for the stock B6 and B5 series buggies.

Best suited for stock classes for reduced rotational mass and weight needed in the hot 17.5 classes (not suggested for modified use).

Works with the stock or MIP 65mm bones.

Only 7gr for the pair.

Photo Gallery