New RC Project hard-coated "Reverse" ball ends for the Tekno NB48.4

0 May 18, 2018, 9:55 a.m.

Main Photo: New RC Project hard-coated "Reverse" ball ends for the Tekno NB48.4

By Mike Garrison
LiveRC.com

New from RC Project:
www.rc-project.it

The Balls are Made in Italy, with latest generation Swiss type lathe center. Our products are made with Ergal 7075-T6 billet and then Hard Coating with a thickness of 50µ. In addition, a Teflon Coating was carried out to reduce the coefficient of friction with the Uniball. The weight of the Kit is 5.50g. Replacing Articles TKR5053A. Kit of 8 Pcs.

"REVERSE"
To ensure greater safety we have developed balls that are mounted contrary to the Standards; in this way, in the event of a strong collision, it is impossible for Uniball to leave its premises, thus avoiding the risk of unforeseen breakages.

Unlike the Original Balls that are mounted with M3X20 Socket Head Screws and the corresponding Nuts, the REVERSE Balls have an M3 Thread; this allowed to eliminate the Original Socket Head Screws and the Nuts replacing the whole with Socket Head Screws M3x10 included in the Kit.

This will Guarantee a more Rigid and Secure Assembly compared to the Original ones.