New Exotek Racing titanium puck bones and 81-tooth POM spur gear for B64

ADVERTISEMENT | ADVERTISE WITH US

---

By Aaron Waldron
LiveRC.com

New from Exotek Racing:
www.exotekracing.com

76mm PUCK BONES, titanium 1 pair, for Bi-metal Bone systems
#1781, $24

76mm long, when assembled- same length as the front B64 axles.

Titanium replacement bones for the MIP Bi-Metal Bone Puck sets.

Half the weight of steel (each bone weighs 3.1gr) and twice the strength of aluminum so that you achieve a lightweight drive line but increase the durability and reduce the wear and tear.

Made of polished and laser etched Ti 6-4  titanium.

Be sure to use a small amount of blue thread lock for hardware and black grease at pivot points when assembling.

1 pair of bones and 1/72 screws per pack.

MIP Bi-Metal Bone Puck axle sets with diff required and not included.

67mm PUCK BONES, titanium 1 pair, for Bi-metal Bone systems
#1782, $24

67mm long, when assembled- same length as the 22 4.0 and B6 67mm cva/hub/axle sets.

Titanium replacement bones for the MIP Bi-Metal Bone Puck sets.

Half the weight of steel (each bone weighs 2.3gr) and twice the strength of aluminum so that you achieve a lightweight drive line but increase the durability and reduce the wear and tear.

Made of polished and laser etched Ti 6-4  titanium.

Be sure to use a small amount of blue thread lock for hardware and black grease at pivot points when assembling.

1 pair of bones and 1/72 screws per pack.

MIP Bi-Metal Bone Puck axle sets with diff required and not included.

B64 HEAVY DUTY 81T SPUR GEAR, machined pom
#1783, $13

Extra heavy duty machined pom (delrin) spur gear with hardware for the B64 center gear diff.

Designed with a thicker mounting base but same teeth width and size as the stock 81t spur which eliminates the problem of the soft stock gears flexing and stripping out under high load race conditions.

Includes mounting hardware and instruction sheet- but bolts right on to the stock gear diff.

Not for the slipper set.

Photo Gallery