By Mike Garrison
TLR Blog Update:
New 16mm EVO Shock Springs for 8ight 4.0
Today we released new springs for the 8ight 4.0 buggies that we are referring to as EVO springs. This is a full line of springs that are closer together in rate for finer tuning as well as a constant coil diameter and longer in length. Between the constant coil diameter and the frequency we have chosen for these, these handle much better in all conditions we have found, especially when it comes to bumps and landing.
They are part numbers TLR344016 through TLR344028.There are a couple of changes needed in order to run these springs on your TLR 8ight vehicles. You will need to use the spring cups that come with the shock ends in LOSA5435 that were for the older 1.0 and 2.0 vehicles.
You will also need to flip your shock collars over so the lip is on the top.
Here are a couple shots of the entire line. You will notice the coloring to be a bit different so it is easy to tell that you are running these.
Thank you for reading and good luck out there with your racing!