By Mike Garrison
New from Exotek Racing:
66MM PUCK BONES, TITANIUM 1 PAIR, FOR BI-METAL BONE SYSTEMS
Titanium replacement bones for the MIP Bi-Metal Bone Puck sets. 66mm long, when assembled- +1mm length for B64 rear axle sets, etc. Half the weight of steel (each bone weighs 2.2gr) and twice the strength of aluminum so that you achieve a lightweight drive line but increase the durability over aluminum and reduce the wear and tear.
Made of polished and laser etched Ti6 titanium. Be sure to use a small amount of blue thread lock for hardware and black grease at pivot points when assembling. 1 pair of bones and 1/72 screws per pack. MIP Bi-Metal Bone Puck axle sets with diff required and not included.
22 4.0 / 3.0 FLITE REAR AXLE, TITANIUM 1 PAIR
Lightweight Ti6 titanium rear axles for TLR 22 series buggies. Machined with a tighter tolerance for less bearing slop than the stock axles and weighs about half the weight of the stock steel axles at 3.7gr each. Best suited for stock classes for reduced rotational mass and weight needed in the hot 17.5 classes (not suggested for modified use). Works with the stock or MIP bones.
B6 / 22 CVA BARRELS, ULTRA LIGHT TITANIUM, 2PCS
Lightweight Ti6 titanium cvd barrels for the TLR 22 series and Associated B6/B64 series cvd's. Only .3gr each! Best suited for stock classes for reduced rotational mass and weight needed in the hot 17.5 classes.