By Mike Garrison
New from Exotek Racing:
8IGHT-XE HD CENTER BULKHEAD SET, W/ CARBON UPPER PLATE
Factory style heavy duty 7075 alloy center bulkhead set for the 8ight-XE. Also includes the carbon fiber top brace. The alloy construction maintains proper gear mesh for longer gear life and reduces the chance of stripped screws coming loose in a race. Uses the stock hardware. Always use blue thread lock and do not over tighten screws.
8IGHT-X XE HD STEERING CRANK SET, 7075
Factory style 7075 alloy steering crank set for the 8ight-X and 8ight-XE. Polished black finish with silver chamfer construction for heavy duty race use reduces the chance of stripped screws coming loose in a race. Always use blue thread lock and do not over tighten screws.
8IGHT-XE COOLING MOTOR MOUNT, 7075 WITH FAN MOUNT
Heavy duty clamping style motor mount set for the 8ight-XE. The 7075 alloy construction offers improved motor cooling because the stock rubber gaskets are removed therefore allowing the motor heat to directly transfer through the mounts and into the chassis. In addition, a fan bar is included that attaches to the motor mounts allowing the use of a high powered 40mm cooling fan.
The new universal 1/8 motor clamping style also makes for easier motor install and removal- simply remove the 2 upper clamps to lift the motor right up and out. Lastly the motor position has been lowered by 1.5mm for a lower center of gravity.
Always use blue thread lock and do not over tighten screws.