ADVERTISEMENT | ADVERTISE WITH US
0
March 15, 2018, 10:23 a.m.
By Aaron Waldron
LiveRC.com
Answer RC "CS" Front Carbon Arm Stiffeners w. 2.5 + 3.0mm screws and drill bit
#ANSOPHB15, £16.64 ($23 USD)
Answer RC "CS" Front Carbon Arm Stiffeners w. 2.5 + 3.0mm screws and drill bit
#ANSOPHB16, £17.92 ($25 USD)
Answer RC "CS" Carbon Arm Stiffeners w. 2.5 + 3.0mm screws and drill bit.
Optional carbon fibre arm covers for the HB Racing monocoque style suspension arms used on the HB D8 series of vehicles. The purpose of the carbon arm covers is to stiffen the arm and give a less flexible suspension set up and reduce traction a little. Ideal in high grip situations or to tune the handling of the car.
These UK made items vary in several ways to the standard HB items and our other own brand items in so far as they do not use countersunk holes for the securing screws giving a two fold benefit:
No countersunk gives a stronger securing surface.
By virtue of not being countersunk they are now not sided so that they can be flipped and used either side meaning if you have a tendency to damage one side you don’t end up with a collection of carbon covers for the alternate side.
Another problem faced by some users is that the stock 2.5mm screws can pull out from the arm over time. Included with this set is 10 x 3.0mm screws as well as the 2.5mm screws which allow re-use of the arm even when the screw threads have become damaged in the arm. Also included is a 2.5mm drill bit which is ideal for opening the stock hole up if going straight to 3.0mm screw fitment.
Includes
- 2 x 1.5mm Arm covers
- 10 x 2.5mm screws
- 10 x 3.0mm screws
- 1 x 2.5mm drill bit
Photo Gallery
Eng / Usd
Français
Deutsch
Italiano
Recent comments