LiveRC - New Products

New Avid RC B7 Aluminum Bellcranks

The Avid RC B7 Aluminum Steering Bellcranks are crafted from 7075-T6 aluminum alloy, black anodized with silver edge highlights for a premium appearance.

Tyler Hooks Sept. 12, 2024, 4:52 p.m. View Comments

New RC Discharger 2S Synchronous Charge Cable

Introducing the 2S 70A Synchronous Charge Cable by RC Discharger (XT90 & 5mm). Upgrade your RC charging setup with this high-performance cable designed for serious RC enthusiasts.

Tyler Hooks Sept. 12, 2024, 4:47 p.m. View Comments

New Team Associated SR27 Datsun and Nissan RTRs

Upgrade your garage game today with these SR27 ready-to-run on road cars and experience the thrill of racing on a small track. The Datsun 240z comes in three colors and the Nissan Z comes in 2.

Tyler Hooks Sept. 11, 2024, 4:38 p.m. View Comments

New RC Discharger 2S Charge Cable

Introducing the 2S 45A Charge Cable from RC Discharger: Upgrade your RC charging setup with this high-performance cable, designed for serious RC enthusiasts.

Tyler Hooks Sept. 10, 2024, 4:41 p.m. View Comments

New Avid RC 7" High-Clearance Pre-Cut Wing

After months of development, the Avid RC 7" wide wing is designed for all 1/10 buggies with high clearance wheel cutouts and low drag.

Tyler Hooks Sept. 10, 2024, 4:48 p.m. View Comments

New Hudy 1/8th Scale Tire Sticks

The HUDY Tire Stick has a unique authentic snap-on one-piece design that allows you to store a set of 1/8 on-road, 1/8 off-road tires or 1/8 GT tires.

Tyler Hooks Sept. 9, 2024, 3:33 p.m. View Comments

New VP-Pro Canopy

VP-Pro is excited to release their newest product. The VP-Pro Pit Tent.

Tyler Hooks Sept. 9, 2024, 3:28 p.m. View Comments

New 1up Racing 'Stay Classy' T-Shirt

Stay Classy at the track with 1up Racing's new premium tee.

Tyler Hooks Sept. 9, 2024, 3:36 p.m. View Comments

New Mon-Tech Racing S1 Quattro Body

Mon-Tech Racing presents the S1 Quattro, a new body for the 1/10 scale rally category.

Tyler Hooks Sept. 9, 2024, 8:35 p.m. View Comments

New Avid RC B7 Idler Gears

The Avid RC B7 idler gears are machined out of self-lubricating plastic so they are perfectly true and allow the transmission to spin much more freely.

Tyler Hooks Sept. 9, 2024, 8:27 p.m. View Comments

New Team Xray GT Brake Disks

Team Xray has released laser-cut, heat-treated, precision-ground ventilated super-lightweight large brake disk for GT racing that ensure vibration-free operation.

Tyler Hooks Sept. 9, 2024, 8:31 p.m. View Comments

New Exalt Phoenix 'Light Weight' IFMAR Approved 17.5 Motor

Team Exalt is proud to release a new/updated version of the 17.5T Phoenix motor that is now IFMAR Approved.

Tyler Hooks Sept. 9, 2024, 8:47 p.m. View Comments

New Infinity 1/8th Buggy Shock Stroke and Rebound Gauge

The IFB8 shock stroke and rebound gauge allows easy measurement of important shock length while mounted on the vehicle during suspension setup.

Tyler Hooks Sept. 5, 2024, 4:05 p.m. View Comments

New RC Discharger ICharger Battery Temperature Sensor

RC Discharger is excited to present the iCharger Temperature Sensor, meticulously designed to seamlessly integrate with your iCharger.

Tyler Hooks Sept. 5, 2024, 4:01 p.m. View Comments

New Revolution Design Aluminum B7 Diff Case

The Revolution Design B7 Aluminum Differential Case (RDRP0679) is one of the most essential upgrades for the Team Associated RC10B7.

Tyler Hooks Sept. 5, 2024, 4:10 p.m. View Comments

New RDRP Hard Coated B7 Idler Shafts

The Revolution Design B7 Idler Shaft Hard Coated (RDRP0677) is a premium upgrade for your Team Associated RC10B7.

Tyler Hooks Sept. 4, 2024, 4:43 p.m. View Comments

New Element Enduro Comp Fox Competition Crawler Kit

This Element kit is aimed towards the serious competitive RC crawler and comes packed full of features to progress you through each gate.

Tyler Hooks Sept. 4, 2024, 4:54 p.m. View Comments

HUDY Titanium Turnbuckles are ultra-precisely machined in house in Europe from high grade titanium material. The high strength super yet lightweight turnbuckles are 30% lighter than steel turnbuckles.

Tyler Hooks Sept. 4, 2024, 4:22 p.m. View Comments

New SMJ TC Rear Bumper Side Stiffeners

A thin and lightweight type that doesn't add noticeable weight even when used on ultra-lightweight bodies. This stiffener is designed to prevent the rear bumper from getting caught inside due to unexpected incidents during races.

Tyler Hooks Sept. 4, 2024, 4:34 p.m. View Comments

New Team Xray X4F Front Chassis Weights

The Team Xray X4F front left and front right 50g brass weights are moved from the bumper under the front driveshafts into the center of the front drive train for improved weight transfer on & off power.

Tyler Hooks Sept. 3, 2024, 3:59 p.m. View Comments

New RC Discharger Regenerative Discharger 2S V2

RC Discharger is thrilled to unveil the new 2S version of its Regenerative Discharger V2.

Tyler Hooks Sept. 3, 2024, 8:16 p.m. View Comments

New Infinity IF18-3 Aluminum Upper Knuckles and Front Bumper

Infinity has released new IF18-3 Aluminum Upper Knuckles for increased rigidity and different tuning options as well as a new hard plastic front body mount.

Tyler Hooks Sept. 3, 2024, 8:26 p.m. View Comments

New Aerox Digital Caster Gauge

Introducing the New Digital Castor Gauge from AEROX. This set from AEROX is used to accurately check and adjust the castor on a range of modern touring cars, such as the Schumacher Mi9.

Tyler Hooks Sept. 3, 2024, 3:30 p.m. View Comments

New Schumacher RC Shard 1/10th 4wd Front Tire

The Shard is the new tire from Schumacher designed for the front of 1/10th 4WD vehicles.

Tyler Hooks Sept. 3, 2024, 3:50 p.m. View Comments

New EcoPower Electron Mini Intelligent Charger and Batteries

EcoPower is pleased to release the new ECP-1007 Electron Mini Intelligent Charger. Also launching are 10 new EcoPower batteries that are directly compatible with the Electron Mini Intelligent Charger as well as with all other chargers.

Tyler Hooks Sept. 3, 2024, 8:05 p.m. View Comments

New Factory Team Carbon Fiber RC8B4.1 Shock Towers

Factory Team has got your lightweight needs for the RC8B4.1 buggy platform covered. Racers can now lower the CG with carbon fiber shock towers and hard-anodized aluminum shock standoffs.

Tyler Hooks Aug. 31, 2024, 10:25 a.m. View Comments

New Power HD S15-XP Direct Mount Xpress Servo

The Power HD S15-XP servo directly mounts into the XPRESS XQ11 / XQ3S / XQ11HR cars, prefectly matching the original servo mount screw hole.

Tyler Hooks Aug. 31, 2024, 9:18 a.m. View Comments

New Bittydesign Skoda Fabia RS Rally2 Body

The Skoda Fabia RS Rally2 body shell is UNIVERSAL and mounts on all 1/10 190mm touring car chassis.

Tyler Hooks Aug. 31, 2024, 9:57 a.m. View Comments

New JConcepts 4/40 Thumb Screws

JConcepts has released 4/40 thumb screws for vintage vehicles for use with battery hold downs and a variety of other applications.

Tyler Hooks Aug. 31, 2024, 8:58 a.m. View Comments

New Whitz Racing Whiplash 2.2" Dirt Oval Wheels

Whitz Racing Products Whiplash 2.2" Sprint Car Wheels are made specifically for Dirt Oval racing.

Tyler Hooks Aug. 29, 2024, 2:46 p.m. View Comments

New Power HD Drift Specific Servo and Gyro

Power HD has released a new drift servo and gyro combo which include the new TDS-2 servo and G2 Gyro.

Tyler Hooks Aug. 29, 2024, 2:33 p.m. View Comments

New J&T Bearing Co. NB48 V2 Engine Mount

The new J&T Engine mount for Tekno RC vehicles has the best features from all versions of the engine mount rolled up into one package.

Tyler Hooks Aug. 29, 2024, 3:46 p.m. View Comments

New Sworkz S35-4 EC Sacile Upgrade Pack

The Sacile pack updates were successfully tested and used by Sworkz's European Champion Juan Carlos Canas in Sacile Italy.

Tyler Hooks Aug. 29, 2024, 3:57 p.m. View Comments

New Infinity TG 1/10th On-Road Clutch

This Infinity 1/10th Scale On-Road Clutch has a lightweight flywheel and optimized weight for efficient power delivery.

Tyler Hooks Aug. 29, 2024, 2:40 p.m. View Comments

New JConcepts S2 XB4'24 Body

JConcepts has unveiled an S2 body specifically for the Team Xray XB4'24 4wd buggy platform.

Tyler Hooks Aug. 28, 2024, 4:24 p.m. View Comments

New JConcepts B7 Shock Towers

Racers have asked and JConcepts has delivered a Carbon Fiber front and rear shock tower option for the popular Team Associated RC10B7 vehicle.

Tyler Hooks Aug. 28, 2024, 6:30 p.m. View Comments

New JConcepts M4 Low Profile Wheel Nuts

JConcepts has your M4mm wheel nut needs covered with a large flange serrated wheel nut set. These high precision wheel nuts are designed with a large, flanged area for additional support against the wheel and serrated for locking security.

Tyler Hooks Aug. 28, 2024, 6:13 p.m. View Comments