New Avid RC -2 22X C-Block

Press Release From Avid RC:
www.avidrc.com

The Avid TLR 22X -2° C Pivot Block was first innovated by Avid for the B6.3 and has turned into a must-have if you are racing on high bite surfaces such as carpet or turf.

This mount frees up the vehicle in the turns and when landing jumps sideways such as corner tabletops. Typically, to get to the low rear toe settings that you need on carpet, you have to start narrowing the pills through the D Mount which is increasing side bite by decreasing your track width. Our C Arm mount prevents that from happening by widening the C pivot block, thus starting you at 1 deg of rear toe with centered pills on the C and D mount instead of 3. You will be amazed at how well your car handles with less rear toe done in the correct fashion.

Details
• Removes 2 degrees of rear toe without removing track width.
• Frees up the car up in turns and when landing jumps sideways such as corner tabletops.
• Made with 7075-T6 and anodized black with silver chamfer highlights.
• Laser-etched Avid logo and -2° on the side for easy identification.
• Fits: TLR 22X and 22XT.