New Bittydesign Rock1 1/10th Scale Rock Crawler Body

Press Release From Bittydesign:
www.bittydesign.net/en/

𝗧𝗵𝗮𝗻𝗸𝘀 𝘁𝗼 𝗱𝗶𝗿𝗲𝗰𝘁 𝗰𝗼𝗹𝗹𝗮𝗯𝗼𝗿𝗮𝘁𝗶𝗼𝗻 𝘄𝗶𝘁𝗵 Vanquish Products, Bittydesign was 𝗮𝗯𝗹𝗲 𝘁𝗼 𝗱𝗲𝘀𝗶𝗴𝗻 𝘁𝗵𝗲 𝗼𝗻𝗲 𝗮𝗻𝗱 𝗼𝗻𝗹𝘆 𝗮𝗳𝘁𝗲𝗿𝗺𝗮𝗿𝗸𝗲𝘁 𝗯𝗼𝗱𝘆 𝗱𝗲𝘃𝗲𝗹𝗼𝗽𝗲𝗱 𝘀𝗽𝗲𝗰𝗶𝗳𝗶𝗰𝗮𝗹𝗹𝘆 𝗳𝗼𝗿 𝘁𝗵𝗲𝗶𝗿 𝗩𝗦𝟰-𝟭𝟬 𝗣𝗵𝗼𝗻𝗲𝗶𝘅/𝗙𝗼𝗿𝗱𝘆𝗰𝗲 𝗺𝗼𝗱𝗲𝗹, a true milestone chassis for the rock crawling thanks to their innovation.

Thanks to careful design, we have made it possible to attach the body to the chassis with the same original system that does not involve the use of normal clips: people can install the ROCK1 body to the VS4-10 using Vanquish components to be screwed to the body itself, this allow to obtain a single body that by means of the front pin coupling and the other fixing points will be perfectly connected to the chassis without any (unsightly) clip being visible.

[# BDCR-RK1-VS4] PRODUCT 𝗙𝗘𝗔𝗧𝗨𝗥𝗘𝗦

𝗧𝗵𝗲 𝗰𝗼𝗺𝗽𝗹𝗲𝘁𝗲 𝘀𝗲𝘁 𝗳𝗼𝗿 𝗩𝗦𝟰-𝟭𝟬 𝗶𝗻𝗰𝗹𝘂𝗱𝗲𝘀 𝘁𝗵𝗲 𝗰𝗮𝗯, 𝗿𝗲𝗮𝗿 𝗯𝗼𝗱𝘆 𝗮𝗻𝗱 𝗶𝗻𝘁𝗲𝗿𝗶𝗼𝗿: 𝗮𝗹𝗹 𝗽𝗿𝗲-𝗰𝘂𝘁 for maximum comfort.

>> Made with 𝗵𝗶𝗴𝗵 𝗾𝘂𝗮𝗹𝗶𝘁𝘆 𝗮𝗻𝗱 𝗴𝗲𝗻𝘂𝗶𝗻𝗲 𝗽𝗼𝗹𝘆𝗰𝗮𝗿𝗯𝗼𝗻𝗮𝘁𝗲 Lexan®

>> 𝗦𝗽𝗲𝗰𝘀: length 470mm, width at the base of the sideskirts at the front 187mm and 205mm at the rear, width at the midpoint of the front wheel arches 185mm and 197mm at the midpoint of the rear ones, height 130mm

>> 𝗪𝗵𝗲𝗲𝗹𝗯𝗮𝘀𝗲: 313mm

>> 𝗦𝗼𝗹𝗱 𝗰𝗹𝗲𝗮𝗿 with protective film outside

>> Included in the package a 𝗱𝗲𝗰𝗮𝗹 𝘀𝗵𝗲𝗲𝘁 𝗽𝗿𝗲-𝗰𝘂𝘁 and the 𝘄𝗶𝗻𝗱𝗼𝘄𝘀 𝗺𝗮𝘀𝗸

>> Fits Vanquish VS4-10 Phoneix and is also compatible with the VS4-10 Fordyce version

In order to offer a product of absolute quality we have set ourselves no limits, which is why, in addition to the ROCK1 body, we have also designed:

• the extremely detailed interior, hyper-realistic cockpit and seats to best enhance the aesthetics of your model, especially for those competing in Class 1
• the steering wheel also with realistic shapes and design, necessary to 100% complete the look of the interior