New JConcepts DR/SR/RB Aluminum Steering Rack and Bell-Cranks

Press Release From JConcepts:
www.jconcepts.net

JConcepts has the steering system on the DR10, SR10, and RB10 covered with an all new light-weight, aluminum steering rack. The rack is CNC-machined and replaces the stock plastic piece, the steering rack by JConcepts comes in a blue or black anodized finish and sports machined chamfered silver edges and engraved JConcepts.net logo. The aluminum, light-weight assembly provides a more rigid steering system with increased steering feel and response.

The rack includes 2 thin crush tubes (black) which should be placed in between the bearings in the rack. During assembly it is important to align the crush tubes in to place and while securing the parts together, always use a light amount of thread locking compound on any thread which assembles into aluminum.

Features:

1. CNC Machined
2. Light-weight, rigid steering feel and response
3. Anodized with chamfered silver edging
4. Blue or black color options
5. Laser engraved JConcepts.net logo

JConcepts has the steering system on the DR10, SR10, and RB10 covered with an all new light-weight, aluminum steering bellcrank assembly. A servo saver-less aluminum steering system is CNC-machined and replaces the stock plastic bell-cranks, the steering bell cranks by JConcepts come in a blue or black anodized finish and sport machined chamfered silver edges and engraved JC logos. The aluminum, light-weight assembly provides a more rigid steering system with increased steering feel and response. The fit of the new bellcranks has been improved by the positioning of the bearings to help eliminate binding when assembled.   

Light-weight construction, designed with additional clearance below the drive arm to allow additional space for personal transponder or add-on weight considerations. The steering bellcranks include 2 thin crush tubes (black) which should be placed in between the bearings on the stock plastic or aftermarket aluminum steering rack. During assembly it is important to align the crush tubes into place and while securing the parts together, always use a light amount of thread locking compound on any thread which assembles into aluminum.

Features:

1. CNC Machined
2. Light-weight, rigid steering feel and response
3. Blue anodized with chamfered silver edging
4. Laser engraved JC logos