LiveRC - New Products

New Factory RC stand-up plates for Prodigy 625 Duo Touch

Do you use a Prodigy 625 Duo Touch charger? Bolt on these stand-up plates from Factory RC to make it easier to use - and save space in your pit area.

Aaron Waldron June 9, 2017, 8:18 a.m. View Comments

New Leadfinger Racing Assassin 2.0 Tactic body for MBX7R

Leadfinger Racing launched its new Assassin 2.0 Tactic lineup of shells, which are designed to provide less drag and intended for high-grip tracks, with this new body for the nitro and electric MBX7R platform that will make its debut at the Alabama M

Aaron Waldron June 9, 2017, 8:05 a.m. View Comments

New Capricorn formula and pan car thrust bearing spacer

Capricorn has released a new formula and pan car thrust bearing spacer, designed in order to house part of the thrust bearing allowing for easier assembly of parts on the axle.

Mike Garrison June 9, 2017, 8:39 a.m. View Comments

New Team Associated B6 and B64 Club Racer kits [VIDEO]

Team Associated has introduced a new kit concept to make it easier for the next generation to get into racing, packaging its championship-winning B6 and B64 buggies with Reedy electronics in the new Club Racer kits.

Aaron Waldron June 8, 2017, 11:49 a.m. View Comments

New West Coast R/C Works on-road servo setup tools

Designed to eliminate the tradition "eye-balling" servo centering method, West Coast R/C Works has developed a range of new tools to increase accuracy in centering servos on 1/12, 1/10, and 1/8-scale onroad cars.

Mike Garrison June 8, 2017, 8:37 a.m. View Comments

New XRAY XB8 aluminum suspension holder and graphite side guard braces

XRAY has presented several new options for the XB8 buggy which includes a +2mm roll center rear suspension holder, and graphite side guard stiffeners to stiffen the center area of the chassis.

Mike Garrison June 8, 2017, 9:51 a.m. View Comments

New JConcepts 1988 Chevy Silverado Extended Cab monster truck body

JConcepts revived an iconic old-school pickup with the new 1988 Chevy Silverado Extended Cab to fit 7" width and 13" wheelbase monster trucks.

Aaron Waldron June 8, 2017, 1:44 p.m. View Comments

New Schumacher CAT K2 and Cougar KC/KD chassis skins

Schumacher has released new pre-cut chassis protectors designed to increase the lifespan and look of the CAT K2 and Cougar KC/KD chassis.

Mike Garrison June 8, 2017, 9:24 a.m. View Comments

New Reedy Blackbox 600Z zero-timing ESC and Sonic 540-FT fixed-timing spec motors

Reedy's new Blackbox 600Z and Sonic 540-FT (available in 17.5 and 13.5 variants) are ideal for competitive spec racing without breaking the bank.

Aaron Waldron June 7, 2017, 8:15 a.m. View Comments

New Capricorn F1 and pan car aluminum rear axle mounts

Capricorn has introduced a new set of rear axle mounts for their F1 and pan car platform. The slides allow for a bigger ride height adjustment range, and have been conceived to match with the new, smaller diameter wheels on the market.

Mike Garrison June 7, 2017, 8:45 a.m. View Comments

Exotek's RX2 LCG 190mm touring car body received ROAR approval

Exotek Racing's RX2 touring car body, released in the fall of 2016, has now received ROAR approval for RX2 bodies numbered GL014.

Mike Garrison June 7, 2017, 10:47 a.m. View Comments

New XRAY XT8 1/8-scale nitro truggy kit

XRAY has officially released the new XT8 1/8-scale nitro truggy kit. The new truck is based upon the XB8 buggy platform and designed in collaboration with Martin Bayer, Ty Tessmann, Juraj Hudy, and team.

Mike Garrison June 7, 2017, 8:18 a.m. View Comments

New HRC Racing fine line decor tape

HRC Racing has expanded their accessory line with new fine line decor tape, available in 3 different thicknesses and 8 different colors.

Mike Garrison June 7, 2017, 9:18 a.m. View Comments

New Capricorn C803 front upper arm mounts

Capricorn has released a new set of front upper arms mounts for the C803, which are 1.5mm higher than the standard version.

Mike Garrison June 7, 2017, 9:31 a.m. View Comments

New XRAY 1.8mm NT1 rear sway bar

XRAY has released the new 1.8mm rear sway bar for the NT1 platform, the thinnest of the available sway bars and intended for increased steering on small, technical tracks.

Mike Garrison June 7, 2017, 8:52 a.m. View Comments

New Reedy HV digital metal gear servos

Reedy's new HV Digital Metal Gear Servos are designed to be a quality upgrade for RTR vehicles with speed and torque ratings that improve driving precision by giving drivers a better "feel" for their vehicle. These servos are also intended as an opti

Mike Garrison June 7, 2017, 10:12 a.m. View Comments

New Pro Star RC Losi 5IVE Titanium inner hinge pins with lifetime warranty

Pro Star RC has released an optional Titanium inner hinge pin set for the Losi 5IVE series vehicles, designed to be 45% lighter and includes a lifetime warranty.

Mike Garrison June 7, 2017, 9:10 a.m. View Comments

New X-Factory Infinity Dirt Spec XB2 rear shock tower

X-Factory has released a new Dirt Spec rear shock tower for the XB2 platform as part of its Infinity line of carbon fiber hop-ups.

Aaron Waldron June 6, 2017, 2:46 p.m. View Comments

New Arrowmax 3x6mm shim set

Arrowmax RC is now packaging 10 each of three different thicknesses of 3x6mm shims in a plastic case.

Aaron Waldron June 6, 2017, 3:02 p.m. View Comments

AMain to give away ProTek RC-outfitted Team Associated RCB3.1 nitro buggy [VIDEO]

Sign up for the AMain Performance Hobbies email newsletter and you could win a Team Associated RC8B3.1 kit with ProTek RC engine and servos, plus a Novarossi exhaust combo.

Aaron Waldron June 6, 2017, 12:25 p.m. View Comments

New RDRP brass suspension mounts for XB4

Revolution Design Racing Products released mass-adding brass suspension mounts to fit the front and rear of the XB4 buggy.

Aaron Waldron June 6, 2017, 12:09 p.m. View Comments

New X Factory Infinity carbon fiber TLR 8IGHT 4.0 shock towers

X Factory has just released their latest Infinity carbon fiber option parts for the TLR 8IGHT 4.0 series buggies.

Mike Garrison June 5, 2017, 8:27 a.m. View Comments

New VRP threaded shock pins for the HB D817

VRP replaces the stock set screws on the HB Racing D817 and E817 buggies with their new threaded shock and sway bar pins.

Mike Garrison June 5, 2017, 8:05 a.m. View Comments

New Capricorn C03 Evo chassis and stick weights

Capricorn RC's new Evo chassis for the C03 is stiffer, for increased traction, and can be fitted with stick weights that can be further used to tune flex.

Aaron Waldron June 5, 2017, 9:37 a.m. View Comments

How-to mount Pro-Line Pro-Loc tires and wheels for Traxxas X-MAXX [VIDEO]

Pro-Line Racing has shared a video explaining how-to mount Pro-Loc tires and wheels for the Traxxas X-MAXX.

Mike Garrison June 5, 2017, 8:19 a.m. View Comments

New Team C TM4 carbon slipper pads

Team C Racing has released new carbon fiber slipper pads for the TM4 which are designed for increased durability and faster acceleration.

Mike Garrison June 2, 2017, 8:45 a.m. View Comments

New Gravity RC lightweight anodized hobby knife

The new Gravity RC hobby knife features a hollow lightweight handle design which is claimed to weigh in at only .3 ounces fully assembled.

Mike Garrison June 2, 2017, 8:21 a.m. View Comments

Tessmann offered sneak peek at new Pro-Line Racing 1/8-scale buggy tire

While preparing for the Manufacturers Cup at Silver Dollar RC Raceway, Ty Tessmann shared the first look at an upcoming Pro-Line Racing tread installed on his buggy.

Aaron Waldron June 2, 2017, 12:57 p.m. View Comments

New XRAY High-Speed XB8 buggy body

XRAY has designed a new racing body for XB8 and XB8E that has redesigned down-force areas to increase the rotation and speed in the corners.

Mike Garrison June 2, 2017, 8:14 a.m. View Comments

New Inductrix FPV Pro micro racing drone [VIDEO]

Horizon Hobby has announced the newest addition to the Blade drone family; the Inductrix FPV Pro. The new mini racing drone is designed with "Bind-N-Fly" technology, and is based on the Inductrix platform with heightened performance, lightened design

Mike Garrison June 2, 2017, 8:29 a.m. View Comments

New RPM B6/B6D rear bumper and skid plate

RPM aims to keep your rear-end protected with their new rear bumper and skid plate for the Team Associated B6 and B6D buggies.

Mike Garrison June 2, 2017, 8:54 a.m. View Comments

New Fantom Racing 5500mAh 7.6v 2S HV Pro Racing shorty LiPo

Fantom Racing has announced their newest LiPo pack; an "Outlaw" high voltage shorty pack capable of being charged up to 8.7 volts.

Mike Garrison June 2, 2017, 9:04 a.m. View Comments

New Muchmore Racing LED Pit Light Stand Pro

The new Muchmore Racing LED Pit Light Stand Pro features a 5-step brightness adjustment, adjustable light angles, and built-in USB charge port.

Mike Garrison June 2, 2017, 9:13 a.m. View Comments

New solid center axle set for the Serpent Cobra GT8-E

Serpent has released a solid center axle alternative for the center differential of the Cobra GT8-E, which is designed to increase acceleration and improve braking.

Mike Garrison June 1, 2017, 9:13 a.m. View Comments

New XRAY T4 brass battery backstop

The new XRAY T4 brass battery backstop is a CNC machined backstop designed to add 5 grams of weight while functioning in place of the stock battery backstop.

Mike Garrison June 1, 2017, 8:26 a.m. View Comments

New RDRP XRAY XB2 aluminium steering plate

Revolution Design Racing Products has introduced an aluminum steering plate option for the XRAY XB2 and XT2 series vehicles, replacing the stock composite part for added stability and durability.

Mike Garrison June 1, 2017, 8:48 a.m. View Comments

New Dromida FPV surface vehicles coming soon

Dromida has announced they are expanding their FPV lineup to include several new RTR surface vehicles, which will include Tactic FPV monitor and goggles.

Mike Garrison June 1, 2017, 9:29 a.m. View Comments

New XRAY NT1 1.8mm front sway bar

XRAY has expanded the list of optional from sway bars for the NT1 platform by introducing the new 1.8mm thick sway bar; designed for smaller technical tracks when the car needs to quickly change direction and transfer weight.

Mike Garrison June 1, 2017, 9 a.m. View Comments

New REDS Racing exhaust manifold

REDS Racing has introduced a newly designed exhaust manifold which is intended to provide a better fit on the engine, improved strength and durability, improved cooling, and longer lifespan of gaskets.

Mike Garrison June 1, 2017, 8:54 a.m. View Comments

New PR Racing vented slipper plates

PR Racing now offers optional slipper plates for its 2WD buggies and trucks that have been machined for better cooling and less weight.

Aaron Waldron June 1, 2017, 3:47 p.m. View Comments

LiveRC Menu

All News

Featured Columns

Featured Articles

Latest Photo Galleries

New Products

Categories