LiveRC - New Products

Reedy releases new 5000mAh 65C stock class racing LiPo

Reedy has just released their newest LiPo in their already abundant lineup of batteries. Thanks to its high average voltage and low internal resistance values, Reedy’s new 5000mAh 65C LiPo is a logical choice for stock class racers who want to reduc

Mike Garrison June 13, 2014, 5:39 a.m. View Comments

JConcepts releases new 4mm large flange serrated wheel nuts

JConcepts has your 4mm wheel nut needs covered with the large flange serrated wheel nut set. These high precision wheel nuts are designed with a large flanged area for additional support against the wheel and serrated for locking security.

Mike Garrison June 12, 2014, 5:48 a.m. View Comments

Bittydesign releases new "Charge" and "Ultra Charge" touring car wings

Bittydesign has just released their newest in touring car wings. Each wing is sold clear, and is made up of 1mm lexan material. The "Charge" version is considered the standard wing for overall good downforce. The "Ultra Charge" version is the ultra d

Mike Garrison June 12, 2014, 5:52 a.m. View Comments

Axial Racing releases new officially licensed 1.9 Falken WildPeak Mud Terrain tires

Axial racing has just released their new officially licensed 1.9 Falken WildPeak MT tires. The Falken WildPeak Mud Terrain tire is probably one of the most anticipated products in the off road industry in quite some time. In the past few years, Falke

Mike Garrison June 12, 2014, 8:36 a.m. View Comments

Sneak peek at the new VBC Racing Firebolt DM 1:10 scale 2wd buggy

VBC Racing has released a few sneak peek shots of their all-new Firebolt DM 1:10 scale 2wd buggy, which is set to be released later this summer. These images are 3D renderings of the new buggy, but show off it's full details. The Firebolt DM appears

Mike Garrison June 11, 2014, 6:40 a.m. View Comments

Reedy releases new 5200mAh 50C 7.4V SQ LiPo pack

Reedy’s innovative SQ configuration LiPo battery has taken the racing world by storm and become a best seller overnight. Modern buggy chassis are perfectly suited for this configuration and by eliminating the need for a jumper wire and reducing the n

Mike Garrison June 11, 2014, 6:28 a.m. View Comments

LFR releases new TLR 8IGHT-E 3.0 carbon fiber motor mount spacer

Leadfinger Racing (LFR) is always looking for solutions to bring durability to the track and give racers an option to help protect there investment. One area that LFR felt could use attention was the tight spacing between motor and chassis on the TLR

Mike Garrison June 11, 2014, 10:01 a.m. View Comments

REDS Racing expands their 1:10 scale brushless motor lineup

REDS Racing has just released three new motors to their growing line of 1:10 brushless electric motors. Today they have released their new blistering fast 3.5T, 4.0T, and 5.5T motors. These new motors have been tested by team drivers to ensure the hi

Mike Garrison June 11, 2014, 5:54 a.m. View Comments

Sneak peek at the new Pro-Line Mugen MBX-7 "Phantom" body?

Pro-Line Racing has released a sneak peek today of an all-new Mugen MBX-7 body that is set to be released later next week (perhaps at the ROAR 1:8 Offroad Nationals). From the looks of things, it appears to be a rendition of their popular "Phantom"

Mike Garrison June 11, 2014, 9:50 a.m. View Comments

Schumacher Racing releases the new Mi5evo competition touring car kit

Schumacher Racing has just released their new Mi5evo. The Mi5evo is an entirely new Competition Touring Car developed from the BRCA National Championship winning and popular Mi5 platform. Superbly engineered and equipped with some revolutionary desig

Mike Garrison June 10, 2014, 5:02 a.m. View Comments

JConcepts releases new XRAY XB4 12mm clamping wheel hex adapters

Converting the front and rear of the Xray XB4 to 12mm hex drive is simple with the release of the new adapter sets from JConcepts. The hex adapters are precision machined, blue anodized aluminum and feature a clamping style design that combine durabi

Mike Garrison June 10, 2014, 7:29 a.m. View Comments

Team Associated releases new Factory Team B5/B5M motor plates

Team Associated has just released their new Factory Team motor plates for the B5 and B5M series buggies. These milled motor plates increase the surface area for added motor cooling. This Factory Team lightweight design, made for the RC10B5 and B5M, c

Mike Garrison June 9, 2014, 10:49 a.m. View Comments

Integy R/C releases new aluminum 1:5 scale setup station

If you have ever been to a race track you will know that proper chassis setup is critical, and can be the difference between a DNF and a checkered flag. Integy now has a 1:5 Scale Pro Grade Setup Station for your 1:5 Scale Baja and other large-scale

Mike Garrison June 9, 2014, 5:56 a.m. View Comments

CustomWorks releases new "Tornado" dirt oval short course truck body

CustomWorks has just released a "Tornado" for the dirt oval racer! Inspired by the real cars that race in the USMTS, IMCA, or UMP series across the nations heartland, the Tornado is a mid-western style dirt oval body, sized for a variety of short cou

Mike Garrison June 9, 2014, 7:09 a.m. View Comments

DE Racing releases new colors to the Borrego SCT wheel family

DE Racing has just released all-new colors to the Borrego SCT wheel family. With offsets for the latest models from Team Associated, Durango, Kyosho, Losi, Traxxas, and Tekno RC, the short course truck world just got a little brighter.

Mike Garrison June 6, 2014, 9:55 a.m. View Comments

Exotek Racing releases new alloy TLR 22 mid motor wing mounts

Exotek Racing has just released their new heavy duty 7075 alloy wing mounts for the TLR 22 mid motor configuration. These new wing mounts are anodized and polished in your choice of glossy black or gun metal grey. Exotek designed these wing mounts to

Mike Garrison June 6, 2014, 4:59 a.m. View Comments

JConcepts releases new TLR 22 2.0 mid-motor "Silencer" body

The JConcepts design team has spent many hours in development with leading team drivers to develop a new high-speed style body, specifically for the latest circuits. One of the most recognizable items, the Silencer body style, has now been designed f

Mike Garrison June 5, 2014, 6:12 a.m. View Comments

PROTOform releases new VRS-N 200mm touring body

As the ultra-fast 1:10 Nitro Touring Cars continue to evolve with new technologies, an ever greater demand is placed on the race body shells in order to keep these machines planted on the track and as drivable as possible in a variety of conditions.

Mike Garrison June 5, 2014, 10:03 a.m. View Comments

PROTOform joins the GT12 class race with the new PFM-12 body

Introducing PROTOform’s first race body for the GT12 class: the PFM-12. Inspired by the supercars that call the esses of Silverstone and Brands Hatch home, this BRCA-Approved race body features a low-slung, cab-forward design sure to provide exceptio

Mike Garrison June 5, 2014, 10:08 a.m. View Comments

Serpent officially releases 411 ERYX "Reactive Rear Steering" system

Serpent has just released their new Reactive Rear Steering (RRS) system for the 411 ERYX series touring cars. This new system provides what is called "active toe-in" in the rear of the car. What this means is that the amount of toe will change accord

Mike Garrison June 5, 2014, 6:20 a.m. View Comments

Serpent releases new ERYX 3.0 aluminum chassis stiffener

Serpent has just released their new aluminum chassis stiffener for the ERYX 3.0 touring car. This new stiffener is designed to be mounted in the center of the chassis, and can be used with or without the stock front and rear stiffener posts.

Mike Garrison June 4, 2014, 5:26 a.m. View Comments

Serpent releases the new Spyder SRX2 rear motor short course truck

Serpent has officially released the new Spyder SRX2 2wd SC truck today. The new truck features a rear motor design (we suspect a mid-motor will soon follow) along with a long list of race inspired features from Serpent designer Billy Easton.

Mike Garrison June 4, 2014, 6:38 a.m. View Comments

Novarossi releases all-new onroad and offroad REX Car engine lineup

Novarossi has announced today the new REX Car engines. These new REX line of engines includes a wide variety of both onroad and offroad engines ranging from 1:10 nitro sedan to 1:8 nitro truggy.

Mike Garrison June 4, 2014, 6:33 a.m. View Comments

PSM releases new Yokomo BMAX2 MR carbon fiber chassis

PSM Option Parts has released their new carbon fiber chassis for the Yokomo BMAX2 MR. It reduces the weight of the car by 50 grams, and is said to give drivers an advantage on low traction racing surfaces. Made up of 2.5mm premium glossy carbon fiber

Mike Garrison June 3, 2014, 6:53 a.m. View Comments

STRC releases new B5/B5M aluminum camber link mounts, hex adapters, and shock bushings

STRC has just released another batch of new aluminum option parts for the Team Associated B5/B5M buggies. The new option parts include a new aluminum rear camber link mount for each, aluminum hex adapters, and aluminum upper shock mount bushings.

Mike Garrison June 3, 2014, 5:27 a.m. View Comments

MIP releases new "Shiny Pucks System" for the Team-C 1:10 2wd offroad lineup

MIP has introduced their popular "Shiny Pucks System" to the Team-C lineup of 1:10 scale 2wd offroad vehicles. These systems are of steel construction, keeping to relatively the same overall weight that you are used to with your steel OEM drivetrain;

Mike Garrison June 2, 2014, 5:24 a.m. View Comments

Reedy releases new "All-In-One" LiPo balance charge leads

Balance charging LiPo batteries is one of the best ways to prolong the life of your LiPo battery and achieve maximum performance. Reedy's new All-In-One balance charge leads give users the tools required to balance charge 2S standard and saddle pack

Mike Garrison June 2, 2014, 5:19 a.m. View Comments

Integy R/C releases new redesigned alloy team setup board

Chassis setup is critical to get the most out of your vehicle, and now you can setup your ride using the redesigned Integy Billet Machined Alloy Team Setup Board. This sturdy, tweak-free board measures in at 42.25mm x 33.25mm with a 12mm height (not

Mike Garrison June 2, 2014, 4:59 a.m. View Comments

Integy R/C releases new 8-piece heavy duty allen wrench set

Stop using kit-included allen keys or hardware store tools to work on your R/C vehicles. Integy has just released their new 8-piece Heavy Duty Allen Wrench Set. This set features HD tips for strength and durability, in the following sizes: 0.050", 1/

Mike Garrison June 2, 2014, 5:11 a.m. View Comments

RPM Products releases new Traxxas LCG chassis nerf bars

RPM Products has released their new Traxxas LCG chassis nerf bars. RPM says, "The chassis layouts of the 1/10th scale Rally, LCG Slash 2wd & Slash 4x4 changed the original design of the stock nerf bars, making our currently available #80622 & #80625

Mike Garrison June 2, 2014, 7:35 a.m. View Comments

Avid releases new Team Associated B5/B5M shock standoffs

Avid has just released their new B5/B5M shock standoffs, designed to be an upgrade from the stock Associated parts. Avid says, "We are selling these as a pair and the B5 / B5M uses the same standoffs on the front and rear so you will need two se

Mike Garrison May 30, 2014, 5:55 a.m. View Comments

Axial Racing released the new SCX10 Jeep Wrangler G6 Falken crawler

Axial has just released their new SCX10 Jeep Wrangler G6 Falken edition crawler. The Axial SCX10 Jeep Wrangler G6Falken Edition elevates all terrain trailblazing, marrying the celebrated Jeep dovetail body with the undeniable performance of Falken Wi

Mike Garrison May 30, 2014, 7:23 a.m. View Comments

Duratrax releases new Li-24 2S-4S Balancing Charger

Duratrax has released their new DTX Li-24 Balancing Charger. With lots of great features at a budget-friendly price, the Li-24 Balancing Charger is a welcome addition to any modeler’s field bag or workbench. To appeal to an even broader range of R/

Mike Garrison May 30, 2014, 7:15 a.m. View Comments

RDRP releases new mid-motor Kyosho RB6 aluminum rear bulkhead

Revolution Design Racing Products has just released their new Kyosho RB6 rear aluminum bulkhead for those using the mid-motor configuration. The new part is machined from high quality 7075-T6 aluminum and features stylish laser etching. This part is

Mike Garrison May 29, 2014, 6:03 a.m. View Comments

DE Racing releases new colors to the Speedline ST wheel lineup

DE Racing has just announced fresh new colors for their Speedline ST wheels designed to fit the TLR 22T and Kyosho RT6. The new colors include green, pink, orange, and red.

Mike Garrison May 29, 2014, 5:55 a.m. View Comments

MIP releases new updated center drive shafts for the Axial SCX10 series

MIP center drive shafts for the Axial line of vehicles are nothing short of legendary in the rock crawling community, but for a while now the Axial SCX10 drive shafts were in need of a face lift to incorporate the running changes that have occurred o

Mike Garrison May 28, 2014, 9:21 a.m. View Comments

Exotek Racing releases new Serpent Spyder SRX slipper eliminator hub

Exotek Racing has released their new slipper eliminator spur gear mounting hub for the Serpent Spyder SRX series buggies and trucks. This slipper eliminator is ideal for stock class and oval racing. The new hub is lighter for increased acceleration a

Mike Garrison May 28, 2014, 9:17 a.m. View Comments

Virtual Racing Industries releases the RX8 buggy to the VRC Pro Simulator

Virtual Racing Industries has issued a press released today releasing the all-new RX8 buggy and physics update to the VRC Pro Simulator.

Mike Garrison May 28, 2014, 8:07 a.m. View Comments

STRC releases new Team Associated B5 and B5M option parts

STRC has releases several new option parts for the Team Associated B5 and B5M buggies. The new parts include a CNC machined aluminum bulkhead, CNC machined aluminum heavy duty front hinge pin brace, and graphite battery straps designed to specificall

Mike Garrison May 28, 2014, 8:25 a.m. View Comments

Schumacher Racing releases new branded glass setup boards

Stylish toughened glass setup boards are ideal for setting up your 1:10 touring, GT10, LMP12, GT12 or 1:10 offroad buggies. Schumacher has released their new glass setup boards available in Schumacher, CORE RC and Contact brands.

Mike Garrison May 28, 2014, 8:18 a.m. View Comments

LiveRC Menu

All News

Featured Columns

Featured Articles

Latest Photo Galleries

New Products

Categories