LiveRC Menu

ADVERTISEMENT | ADVERTISE WITH US

New JConcepts Step Spike and Taper Spike Tires

New Products

ADVERTISEMENT | ADVERTISE WITH US


4032_1.jpg

Press Release From JConcepts:
www.jconcepts.net

As years go by, certain items and trends are often looked back on with gratitude. The late 1980’s and early 1990’s was built on pin style tires, and JConcepts is re-imagining a vintage tire line-up from 1991 and adapting them to a 1.9” front 2wd wheel. The Step Spike, built on a small radius carcass to fit the Hazard #3358 and Mono #3437 front wheels are designed for today’s compounds and with optimized pin spacing and placement are built to work in dirty and loamy conditions.

Step Spikes on the front of a 2wd buggy appear very rugged and capable of turning inside of just about anything in wet surface conditions. When dirt sticks to the tires, these style tires dig hard with their dual and step spike construction providing two layers of rubber to bury into deep rooted conditions. The square and bottom block is positioned 90 degrees to the surface carcass and is a platform for the cone type pin which bends and flexes with surface terrain.

The pins terminate very early and near the sidewall, so drivability is easier in 180-degree corners. A very small rib is placed on the sidewall to help control flexibility and provides a finishing touch to the appearance of the classic front tire combination. Re-imagining the RC industry is a new phase of development where custom creators and designers look back on the golden age and add a touch of modern-day technology to older concepts. The Step Spike is one of those items, and wouldn’t it been nice to take it back in time with you to 1991?

When it comes to embracing the RC community, JConcepts supports hundreds of events per year and locks in on key events promoting racing, bashing, scale and trail activities, and series event participation. It’s this type of activity that helps the JConcepts Team strive for new heights in performance while interacting with the best the hobby has to offer. Product designs are packed with over 30 years of RC experience and backed with JConcepts customer support and racing heritage.

Features:

  • Classic 1.9” bead mounting diameter
  • Step Spike design with square base feature
  • Continuous carcass for side bite
  • Detailed and retro sidewall lettering
  • Available in green compound
  • Includes JConcepts And-1 open cell inserts

As years go by, certain items and trends are often looked back on with gratitude. The late 1980’s and early 1990’s was built on pin style tires and JConcepts is re-imagining a vintage tire line-up from 1991 and adapting them to a 1.7” rear 2wd wheel. The Taper Spike, built on a bubbled carcass to fit the Hazard #3359 and Mono #3437 rear wheels are designed for today’s compounds and with optimized pin spacing and placement built to work in dirty and loamy conditions.

Taper Spikes on the rear of a 2wd buggy appear very rugged and capable of gripping anything in wet surface conditions. When dirt sticks to the tires, these style tires dig hard with their tapered spike construction providing a rubber pin to bury into deep rooted conditions. The bottom of the pin angles extremely aggressively, a hard taper into the cone type pin which will naturally bend and flex with surface terrain. The Taper Spike in the Green compound feels very pliable to the touch, adjusts to variation and with green compound presents itself to surfaces in a unique way.

The pins terminate very close to the end of the sidewall and slightly overhang so drivability is easier in 180-degree corners. A very small rib is placed on the sidewall to help control flexibility and provides a finishing touch to the appearance of the classic front tire combination. Re-imagining the RC industry is a new phase of development where custom creators and designers look back on the golden age and add a touch of modern-day technology to older concepts. The Taper Spike is one of those items, and wouldn’t it been nice to take it back in time with you to 1991?

When it comes to embracing the RC community, JConcepts supports hundreds of events per year and locks in on key events promoting racing, bashing, scale and trail activities, and series event participation. It’s this type of activity that helps the JConcepts Team strive for new heights in performance while interacting with the best the hobby has to offer. Product designs are packed with over 30 years of RC experience and backed with JConcepts customer support and racing heritage.

Features:

  • Classic 1.7” bead mounting diameter
  • Taper Spike design, taper to cone feature
  • Continuous “bubble” carcass for side bite
  • Detailed and retro sidewall lettering
  • Available in green compound
  • Includes JConcepts And-1 open cell inserts
{{block.title}} {{block.title}}
Share:
blog comments powered by Disqus

ADVERTISEMENT | ADVERTISE WITH US

About the Author

Tyler Hooks is a recent college graduate with a BBA in management and a Minor in Communications from St. Edwards University as well as a ROAR Stock National Champion and was apart of the IFMAR World Championship USA team in 2016. Tyler is currently an Editor as well as in the Advertising department at Live Race Media and frequently is apart of the broadcast team at major events.

Recent comments

ADVERTISEMENT | ADVERTISE WITH US